New User? Sign In and help us improve your support experience.

Registered users - sign in

Email Address :

Example: your_address


Please log in with your PeoplePC email address and password.

This helps us provide the best information possible,
and you won’t have to login on your next visit.

Email Address :

Example: your_address


Thank You. You have successfully logged in.

Sorry, there is a problem with this account, One moment while we direct you to a Live Agent.

silhouettes EarthLink Logo
Search Knowledgecenter
Save to Favorites | Print Page | Save as PDF

How To Setup/Configure Your Cable or DSL Modem for Ethernet Home Networking
Home Networking Ethernet
  • Article ID: 143230
  • Last modified date: April 5, 2012 7:04

In order to successfully setup your Cable or DSL connection for Ethernet Home Networking, you must have the EarthLink Home Networking service on your account. You can order this service through MyAccount

NOTE: You will experience temporary Internet disruption within this setup. We suggest that you print these instructions before continuing.

Setting Up Your Ethernet Home Network

Set your DSL modem to bridge mode. Visit the Configuring Your DSL Modem for a Home Network page for further instructions on how to do this. If you are using a Cable modem, you can skip to Step 2.


NOTE: Only your DSL modem and computer should be connected for this part.


Turn off the modem and router if they are both on. Take the Ethernet cord from your computer and plug it into the Internet, LAN, or WLAN port of the router. Take another Ethernet cord and connect the computer to the router. If your router has multiple Ethernet ports, plug the Ethernet cord into the first port (Port 1).


Turn on the modem. Wait between 10-15 seconds, then turn on the router.


Once an Internet connection has been established on your computer, configure your broadband router. Please select the type of router you have below:


Linksys E1000/E1200 for DSL & Cable

Linksys WRT54G for DSL

Linksys WRT54G for Cable

Linksys WRTP54P for DSL

Linksys WRTP54G for Cable


NOTE: We currently only have instructions for the above router(s). The configuration may be the same if the brand of your router is similar to any of the aforementioned router(s).


Connect the other device(s) to the router via an Ethernet cord. The maximum amount of ports your router has equates to the amount of devices that can be connected on this network.

Was this article helpful to you?
Your rating
If any information was unclear, or the information you were seeking was not provided, please let us know! Your feedback will help us improve this service.
NOTE: This form is for feedback only to help us improve our support site. Changes, additions or the cancellation of products cannot be processed via the feedback form. Comments entered here will NOT receive a personal email response. If you have a technical or account issue that needs immediate attention, please
Bottom Container